SMT PCBA Assembly Line online PCBA Cleaning Machine smt stencil cleaning machine for SMT MACHINE LINE

skype:sensenhenhao,whastapp/wechat:+8613424013606

online PCB Cleaning Machine Upgrade:

1. PC control, PC program, very convenient operation, can be connected to the MES system, previously it was touch screen operation;
2. Cleaning spray, rinsing spray, chemical isolation air knife, wind cutting air knife and other pressures, all electronic monitoring and feedback; the previous machine had a mechanical pressure gauge.
3. Long condenser (double condensation) mechanism, liquid consumption is reduced by 50% compared to before;
4. The layout of the nozzles on the spray bar has been optimized, and the cleaning capacity is 20~30% higher than the previous machine;

5. The double-layer design at the bottom of the machine adds water leakage, automatic detection and alarm functions for liquid leakage.
6. Added automatic wastewater discharge function. The previous machine did not have it.
7. The height of chemical isolation and wind cutting air knife is adjustable, and the wind cutting effect is better; the previous machine could not be adjusted;
8. A set of spray bars is added to the pre-rinsing, and the pump power is increased, which enhances the pre-rinsing capacity.
9. The heating pipes have added mechanical over-temperature protection, which the previous machine did not have.

This equipment is mainly used for the cleaning of assembly parts and semiconductor flux residues in the electronics industry. The water-based cleaning machine is used for spray cleaning to remove surface flux residues, solder balls, solder paste, dust, impurities, oil and other pollutants. Clear. Rinse with deionized water to make the product 100% clean, without any safety hazards, and harmless to humans and the environment.

PCBA Assembly Line Cleaning Machine Standard cleaning process:

Into the board → pre-cleaning → cleaning → chemical isolation → pre-rinsing → rinsing → rinsing Ⅱ → last spraying → air knife cutting water Ⅰ → air knife cutting water Ⅱ → hot air circulation drying → board exit

PCBA Assembly Line Cleaning Machine characteristics:

The whole machine is made of 304 stainless steel, which is durable and resistant to acid, alkali and other cleaning fluids.

Suitable for large batches of PC B A to complete all processes of washing, rinsing and drying online

Excellent cleaning effect, effectively remove rosin, water-soluble flux, no-clean flux

Organic and inorganic pollutants

Unique chemical isolation method, lower running cost

PC B A of different sizes can be cleaned

Resistivity monitoring rinsing liquid to ensure product cleanliness

The nozzle pressure can be adjusted to meet the cleaning pressure range of different products

All heating temperatures can be adjusted

Air knife cutting water + ultra-long hot air circulation drying section

Optional spray cleaning knife for better cleaning effect

Large-size color touch screen automation control, Chinese / English operation interface, for different

Quickly edit and save product cleaning process parameters

Flexible running of water or chemical cleaning

Unique rinsing overflow design, saving water consumption

U PS backup power supply system

Short delivery cycle

Localized service team and sufficient spare parts supply

PCBA Assembly Line Cleaning Machine picture show: