SMT SEMI cleaning machines for leadframe with QFN for semicon
sky-pe:sensenhenhao,wha-stapp:+8613424013606
SMT SEMI cleaning machines Features :
1)This system is constructed by SUS304 stainless steel material, It
is an intergrated machine with very good acid and alkali
resistance.
2)Flat net conveyor and special net transport mechanism, make it
very stable.
3)Long wash section, prewash+wash1+wash2, perfect flux cleaning
effect, more easier to set machine parameters.
4) Long rise section, pre-rinse+rinse+final risne,meet the
requirement of cleaness. Powerful and high flow air blower, special
design air knives, super air blow effect. 5)Long heat dry section
and SUS316 air heater,special air knives, make it perfect air heat
effect.
6)Several type of high volume spray nozzles, cover both high
immerse and spray pressure requirements.
7) Equipped with low noise high performance air blower, to reduce
noises and improve environment.
8) Equipped with liquid level sensor to protect the system working
on normal water level and prevent water level abnormal to protect
heaters and pumps.
9) Water tank bottom tilted design, so that water can drain off,
for the convenience of water tanks maintenance.
10) Equipped with water flow meter for the operator to know water
consumption.
11) Wash and rinse sections 3 layers seal: no liquid mist or water
vapor leakout.
12) DIwater overflow replacement: DI water overflow replacement
from final rinse to rinse section , rinse section to prerinse
section.
13) Double liquid or water LS protection: Double LS in each liquid
or water, double protection.
14) Double tempreture detector protection: Double tempreture
detetors in each liquid tank ,water tank, hot air section, double
protection.
15) DI water resistance real time monitoring: inlet DI water
quality check.
16) Two sets of spray pressure and air meters
SC820 electric control safety protection
1) Mitsubishi PLC ,and touch panel operation interface, easy for
operator to use this system
2) 3-color indicator and alarm buzzer design to ensure the operator
to know system running state; If there is any abnormal situation
happens,the buzzer will give out noises and red light will twinkle.
3) There is a light sensors on the entrance section of the system.
If no chips are put in over setting time, the system will turn off
pumps and air blowers to save energy and water. The system will
awake when new chips are put in again.
4) Equipped with chips drop alarm function, monitoring chips in
time.
5) Heat temperature adopt automatic PID and analog quantity control
calculation system to firmly control temperature deviation,make
temperature rise more stable.
6) Equipped with auto temperature control system and over
temperature protection function to avoid damage to the system.
7) All pumps,air blowers,heaters are overload protected to avoid
damage to them.
8)Current surge protection: all electric devices start every 2
seconds one by one to reduce instant current shock.
9) Power failure protection: Equipped with UPS system for net
conveyor to send out 3D glasses trays at the time of sudden power
failure.
10) Alarm when the system is in trouble, trouble information will
be shown on touch panel for the convenience of trouble shooting.
SMT SEMI cleaning machines speec.:
S/N | ITEM | SPEC |
1 | Chip size max | 600*400mm(W*H) |
2 | Chip height | 100mm |
3 | Conveyor net width | 600mm |
4 | Conveyor net speed | 0.1~1.5m/Min |
5 | Conveyor net direction | Left to Right |
6 | Conveyor net height | 900±25mm |
7 | Wash liquid temp | RT~80℃ |
8 | Rinse water temp | RT~60℃ |
9 | Hot air dry temp | RT~100℃ |
10 | DI water supply | 3~15L/Min |
11 | Air exhaust amount | 42m³/Min |
12 | Power | 150KW |
13 | Air supply | 0.5~0.7Mpa,200~400L/Min |
14 | Power supply | AC380V,3P,50/60HZ |
15 | Machine size | L6600*W1800*H1850(mm) |
16 | Machine weight | 3600KG |
SMT SEMI cleaning machines picture show:
